2004 Oldsmobile Alero "crank sensor" Questions

where is the crank shaft sensor located on my 2000 alero? CRANK SHAFT SENSOR FOR A 2.4 ENGINE NEXT TO OIL FILTER.FOR THE 3.1 - 3.4 ENGINES CRANK SHAFT SENSOR LOCATED BEHIND CRANKSHAFT PULLEY.

...I have a 03 olds alero in my shop,and no codes. I changed the crank position sensor and that helped for some time. I am looking a the cam position sensor and the ignition control ...

...crank sensor on 2000 olds alero 3.4 and where is it located It depends on which crank sensor you are wanting to replace.  There are two of them.  The 24X sensor is located behind the front ...

...no injector pulse Sounds like the computer is dead, or not getting a signal from the crank sensor. Can you check the crank sensor with a meter, or use a scanner to check data input to the computer

...crank shaft sensor located on my 2000 Where is the crank shaft sensor located on my 2000 alero? ABOVE THE OIL FILTER ON THE 2.4 ENGINE AND THE 3.1 AND 3.4 ENGINE CRANKSHAFT SENSOR LOCATED BEHIND ...

crank sensor location Was running and drivinggood and one day wouldn't start.It will turn over but wont start.I was told it was timing chain and someone else told me it was crank position senors.Could

...sensor. and make sure all rubber rings if any avalable are replaced as well. then reinstall starter and oil filter and start car 2 types crank sensors 7x and the 24x the 7x remove oil filter the 24x ...

...crank sensor or cam sensor would cause those exact symptoms-have the computer scanned to see if there are any pending codes (done free at most commercial auto parts stores). If there are, write the ...

...crank sensor any help would great thanks remove the sensor then with a meter set to the lowest milliamp setting connect the meter to the two wires on the meter and move a spanner across the head of ...

Where is the crank position sensor located? And Where is the crank position sensor located? And how do you replace it? bottom front o engine, below vibration dampner front o oil pan