1989 Oldsmobile Cutlass Ciera "crankshaft sensor" Questions

Ad

Question about Oldsmobile Cutlass Ciera

1 Answer

...crankshaft sensor on pedestal. Position sensor with pedestal attached on Tool J-37089. Position tool on crankshaft. Install bolts to hold pedestal to block face, torque to (18-26 lb. ft.). Torque ...

Ad

Question about Oldsmobile Cutlass Ciera

1 Answer

...Crankshaft Sensor See Figures 2, 3 and 4 Disconnect battery negative cable. Remove serpentine belt from crankshaft pulley. Raise and safely support the vehicle. Remove right front tire and wheel ...

Ad

Question about Oldsmobile Cutlass Ciera

2 Answers

...bottom of the engine block is the oil pan. The crankshaft sensor is on the side of the oil pan. Take care. Right side behind the harmonic pully !! You can see a connector with 4 wires, good ...

Question about Oldsmobile Cutlass Ciera

1 Answer

...Crankshaft sensor problems are at times intermittent and the vehicle may start and run for some time until problem occurs. Try to reproduce the complaint. When engine stalls or if the engine will not ...

CRANKSHAFT POSITION SENSOR Fig. 8 Ignition Coil Module Assy 2.5L/4-151 The Crankshaft Position Sensor is mounted remotely on the bottom side of the ignition module. RH Side Of Engine. Front RH Side Of

Question about Oldsmobile Cutlass Ciera

1 Answer

...crankshaft sensor have to be adjusted, match it to the old one for adjustment, just make sure that the fins on the back of the harmanic glide through the sensor and they don't hit, or it will damage ...

...would help me to install it as I'm not sure of the exact location to install it. Thanks, Carole Below is the crankshaft sensor for a 92 3.3ltr. You didn't say what engine you have. Good luck.

Question about Oldsmobile Cutlass Ciera

1 Answer

crankshaft sensor where is the crankshaft sensor located and how can i test it? I have already checked the coil pack and the modular and they are fine. I was told to check the crankshaft sensor next ...

Crankshaft sensor and ignition module keep taking a dump. I have replaced the main ECM, Ignition Module (Now 3 times), Crankshaft Sensor (Now 4 times), Coil Packs, Fuel Pump, Fuel Injector, spark plug

Question about Oldsmobile Cutlass Ciera

1 Answer

94 olds 3.1 crankshaft position sensor location crankshaft position sensor location should be on backside of motor in the middle of the block - above right side cv axle coming out of transmission

Not finding what you are looking for?
Cars & Trucks Logo

472 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...