1991 Oldsmobile Ninety Eight Regency "wire" Questions

WIRING DIGRAM PLUG WIRES NEW PLUG WIRES AND O2SENSOR CAR STILL MISSES BAD LIKE ONE PLUG WIRE OFF SMELL GAS REAL BAD so what are you working on make model and engine and year

fuse box diagram for 1990 olds 98 i want to cut fuse box wire diagram for 1990 olds 98 i want to cut wires to power door locks Review this Wiring Schematic about Olds 98 ('89, '90 & '91): 1989 1 ...

...the starter would not operate, the starter, battery and solenoid were all good.) I found a small wire broken in the steering column, It came from the ignition switch, I soldered the wire back ...

2004 gmc sonoma will not start after very hard braking have replaced map senser This could be electrical, when you get engine not to start check your fuel pressure and also see if you have spark, this

...at all battery good no problems til now replaced ignition switch but nothing could be the small wire from ignition to the starter motor ,not the main battery feed wire,the wire that goes to the ...

...so I was pretty sure it wasn't the battery. It gets fuel, my dad is a mechanic and has found no bad wires or fuses. The car will turn over if he jump starts it but will not stay running. Would ...

...tried the following to re-program the fobs, but with no luck: - Analyzed ALDL connector to look for wires in spaces A and G to jumper; 4 wires found, but none in space G - Dropped glove box to look ...

need to program key fob for 1998 Oldsmobile 88 You can do this at home. You will need a jumper wire that can be inserted into the pins on the DLC connector. This is the data link connector under the ...

1982 olds wont start i can jump it across the selinoid and it starts but when i remove jumper wire it dies have you replaced the selinoid? It sounds like the 12 volts is not staying constant to the ...

...It is either located on the bottom of the rad or on the block some where. It should be a two wire sensor...not a one wire(for gauge) Sometimes when the sensor is faulty the ecu will not get a ...