2005 Chevrolet Colorado "removing intake manifold chevy" Questions

intake manifold cover I have an 05 chevy colorado 3.5 5cyl. I noticed a vacuum leak on the hose that goes from the valve cover to the intake manifold.Problem is that in order to fix the leak,the black

intake manifold.Problem is that in order to fix the leak,the black plastic cover over the intake manifold needs to be removed or at least loosened.Any idea how this cover can be removed? mine is doing

...intake manifold to replace the valve cover gasket ( Chevy colorado 4 cylinder 2.8) Thank you! if the intake manifold comes back over the rocker cover then you will most probably have to remove it as ...

...removing the upper intake manifold, I could not get the manifold loose, it is sticking in the center where I believe there is wiring and fuel lines the go to the underside of the intake. I need to ...

...intake manifold. Make sure you get the harness for the knock sensors. and clean out all of the rust and junk you're going to find donw in the holes before and after you replace the sensors. There are ...

...intake manifold on 94 Chevy 5.7L TBI I have removed all the bolts on the edge but the intake still won't braek loose. There are recessed allen head bolts on top of the manifold. Do they need to be ...

intake manifold located on a 1997 Chevy 2500 van? The upper part of the intake manifold is the plastic part of the assembly, it's held on with small 10 millimeter headed bolts. NOTE: This dosen't have

...removing so that reconnection is precise to factory settings. Remove these parts, individually, from the intake manifold. Loosen the bolts that hold the intake manifold to the Impala's ...

...intake manifold. You will have to remove the intake to get to the sensors. 95% sure manufacturers place the knock sensor on the intake manifold-it's where the knocking happens-(fuel/air mixing). Mine ...

...intake manifold. 5. Remove the cruise control cable, (if equipped). 6. Remove the fuel lines from the intake to the rear of the block. 7. Remove the ignition coil and the bracket. 8. Remove the upper ...