1999 Oldsmobile Alero "replace bearing" Questions

Ad

Question about Oldsmobile Alero

3 Answers

replace front wheel bearing is it hard to do on 2002 alero its actually pretty easy if you have the basic tools needed and a little mechanical knowledge, because i dont think you can buy just the ...

Ad

...replace the hub and bearing assembly, did that still same noise. Any idea? Not tranny, coast and noise stays, replaced rotors, pads, and rotated tires That's indicative of a wheel bearing, which is ...

Ad

Question about Oldsmobile Alero

1 Answer

...replace rear wheel bearing hub When they replaced the wheel bearings there are sensors connecting to the hub I would make sure that the sensors are connected and that there is no corrosion on the ...

...Hi, there I solved it myself turns out it was the driver front Abs sensor. the bearing had to be replaced because the Abs sensor is build into the bearing. The wire may have come loose, have you ...

Question about Oldsmobile Alero

1 Answer

side floorboards, feels like its coming from the front wheel, my tires are new all around. Recently replaced the entire front brake system (calipers to pads) along with a new wheel bearing. both wheel

Question about Oldsmobile Alero

1 Answer

...replace or a symptom of  bearing noise.  However all what you can do is to jack/hoist up the suspected wheel and rotate it freely by hand, if there is rumble noise or a friction or wobbling ...

replace Front Struts and bearing on 99 GLS ABOUT $500.00 DOLLARS IF YOU DO IT YOUR SELF.IF GARAGE DOES IT.GET A PRICE CHECK FIRST.TAKE AT LEAST $1200.00 WITH YOU.LABOR CHARGE WILL BURN YOUR POCKETS. I

My front wheel barring has a bad sensor, how can I repair this? The only way to repair the abs sensor located in the bearing hub assembly is unfortunately replace to the bearing hub assembly.

Question about Oldsmobile Alero

3 Answers

replace the wheel bearing. In order to know which wheel bearing is the culprit, you'd have to have the car hooked up to a scan tool capable of reading ABS codes. I had the same problem in my 01 Alero.

Question about Oldsmobile Alero

1 Answer

...bearing WHEN YOU REPLACE ROD BEARINGS YOU HAVE TO CHECK CRANKSHAFT JOURNALS WEAR.IF TAPER TOO MUCH.CRANKSHAFT HAS TO BE REGROUND OR REPLACE.YOU HAVE TO TAKE ENGINE OUT OF CAR.TO DO A SHORT ...

Not finding what you are looking for?
1999 Oldsmobile Alero Logo

1,892 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...