1998 Oldsmobile Intrigue "oil pressure sender unit location" Questions

Question about Oldsmobile Intrigue

How do you change an oil pressure sensor?

oil pressure sensor? I need to know how to change a oil pressure sensor. I know where it is located I just can't figure out how to get it loose from the oil pan. I've never seen an oil pressure sender

Question about Oldsmobile Intrigue

1 Answer

3800. Where is the oil pressure sending unit located?

oil pressure sending unit located? I'm not familiar with your vehicle. However, an oil pressure sender unit is usually located on the block, below the cylinder head. it's more often than not a screw -

Question about Oldsmobile Intrigue

1 Answer

Where is the oil pressure sending unit located on

...oil pressure sending unit located on a 2000 jeep grand cherokee 4.0 liter Removal & InstallationDisconnect the negative cable from the battery. Raise vehicle on hoist. Remove front splash shield. ...

Question about Oldsmobile Intrigue

1 Answer

Where is the oil sending unit switch located on a

...oil pressure sender connector (4). Remove the pressure sender (2). To install: Install oil pressure sender. Connect oil pressure sender wire. Install front splash shield. Lower vehicle. Connect the ...

Question about Oldsmobile Intrigue

1 Answer

Where is the location of the oil pressure sender on a 2014 awd Chevy Equinox?

...oil pressure sender on a 2014 awd Chevy Equinox? The AWD Equinox has two model selections (LS & LT) and two 2.4L engine options (K2.4L FI DOHC & the K2.4L Flex Fuel DOHC.) Information on the ...

Question about Oldsmobile Intrigue

1 Answer

I need to replace the oil sender switch on my 2002 Buick La Sabre

oil pressure sending unit 3/8 deep socket remove oil pressure sending unit you need teflon tap sealer for oil sending unit threads.okay to replace oil pressure sending unit.you need safe raise support

Question about Oldsmobile Intrigue

1 Answer

Location of oil pressure sender on '98 Linc. Navigator

...oil pressure sender on '98 Linc. Navigator just trying to find the oil pressure sender (sensor) on my Navigator. Many thanks... Peter the oil pressure sending unit is usally located in the same side ...

Question about Oldsmobile Intrigue

1 Answer

Oil pressure sender

oil pressure sender location of oil pressure sender Oil Pressure Sending Units are generally located somewhere around the oil filter, and screw directly into the engine block. Most have a one wire ...

Question about Oldsmobile Intrigue

2 Answers

How can I check oil pressure guage is there a sensor or vacuume line that could of worked loose where would it be located at

...oil pressure guage is there a sensor or vacuume line that could of worked loose where would it be located at Location of oil pressure sender unit depends on what engine you have. There should be one ...

Question about Oldsmobile Intrigue

1 Answer

Where is oil pressure guage sending unit located on 1999 GMC suburban 5.7l vortec motor?

...oil pressure guage sending unit located on 1999 GMC suburban 5.7l vortec motor? I can't locate the oil pressure sending unit to replace it. I've looked all over but can't seem ...