Question about Dodge Durango
...intake manifold on a 1995 grand cherokee V8 5.2 I broke an EZ out in the thermostat housing hole. I can't get it out. Please watch the video. 98 Grand Cherokee 5 2 V8 318 MOPAR M1 Intake Manifold ...
...intake manifold. Remove the left side exhaust manifold. Remove oil level indicator tube. Remove rocker arms nut, rocker arms, balls and pushrods. Unfasten the cylinder head bolts evenly, then remove ...
...intake manifold. Remove the left side exhaust manifold. Remove oil level indicator tube. NOTE: When removing the valve train components they must be kept in order for installation in the same ...
...of parts that controls the air supply to the engine. The throttle body is a butterfly valve mounted on the intake manifold and is controlled by the accelerator peddle to control engine
...intake (yep you have to remove the top section of the motor to see or replace them). Also you need to go to a special location on the Internet to find a replacement fuel regulator or you will be ...
...intake manifold off and the connecting hoses, I found that the oil was comming from what I would have thought would be a hose connected to a pcv valve. I don't think that my 86' 944 has a pcv valve. ...
...air filter and or fuel filter change, this stupid items also are a number one cause of performance troubles. On my 96 960 I had to replace the intake manifold rubber fittings to achieve a smooth
Question about Nissan Cars & Trucks
...intake manifold in the back that is located under the upper intake manifold also called the upper plenum. The lower intake manifold is wedged between the 2 heads and is an enormous pain in the azz to ...
...intake manifold. Please post more information by Clicking on the comment link. I will follow up. I posted this problem once but left something out. I inserted it in all caps below. I have a 94 GMC ...
3,011 questions posted
Usually answered in minutes!
1,616 Questions
1,378 Questions
886 Questions
1,005 Questions
766 Questions