1998 Dodge Intrepid "cranks start" Questions

Is the cam sensor tied in with the tach,my car quit running going down the road and now it does'nt want start.Its cranking over but the tach is'nt moving 96 intrepid 3.5 engine. crank sensor is tied ...

1997 dodge intrepid crank no start fuel pump supplying 60 psi to rail, no power to ignition coil but if cam or crank sensor no good why is there fuel pressure? check the asd relay swap it with another

...cranks alot to get started depends onwhat day but have to crank a while to start it checked all plugs they look great. put the engine in, in november after about a month it started acting like this ...

had to take timing belt off ,need to reset car wont start is it a clean crank or a lazy slow crank ? if clean crank check to see if you get a spark or pulse at the injector slow and lazy crank double ...

Vehicle stalls sometimes 1999 intrepid will start fine and run ok then will stall. Wont start for a while sometimes for a couple of hours. Is it the ignition switch, starter, cam sensor, or crank ...

...for your time. When you say won't start do you mean it will crank over but not fire off or do you mean it doesn't' turn over at all? We refer to this a "No crank no start" or "Cranks will not

...start, wont crank? or cranks, start -die allpar could have tsb data for you. or the public library, i look cars up on mitchell database there and get recalls/tsb's as well as pinpoint tests for

...not start. It ran fine before. Any suggestions? What do you mean, put in 2 bearings? did you measure the crank? bearing clearances? what do you mean by wont start? wont crank? cranks but wont

replace the timing belt and the car will not crank Always crank motor over by hand with a ratchet or breaker bar before attempting to start with key. You can very well ruin or lock up your motor if ...

dodge intrepid 1997 3.5 engine code p0320 it will not start. This means there is no crank reference at the pcm the crank sensor is a common problem with that vehicle but I would be sure to check for ...