1998 Dodge Grand Caravan "change tensioner pulley 98" Questions

...a socket at torque bar on the bolt ant turn counter clockwise. the tensioner is spring loaded use a wrench;[15mm?] on the tensioner pulley nut to move the 'arm' it's attached to at the engine

CHANGE DRIVE BELT ON MY 98 GMC SONOMA 4 CYLINDER it may be easier to attach the breaker bar to the tensioner arm from under the vehicle to relieve belt tension On 1994-97 2.2L engines and 1994-96 4.3L

...change the serpentine belt on '98 Plymouth Breeze? The serpentine belt on my '98 Plymouth Breeze is severly cracked and I would like to know how to replace it? All you need is a long prubar (or you ...

...tensioner could that be true? When you change a water pump on a vehicle with a timing belt you change the tensioners & idler pulleys as well Using the wrong oil & not changing it every 4000 ...

...change remove the negative battery cable from the battery. loosen the serpentine belt by using an open-end box wrench and pull the tension pulley back (it's spring loaded, so be careful) by the bolt, ...

...change the alternator belt, you have to loosen the lower mount bolt on the alternator, loosen block shaped bolt that the long adjuster bolt goes through, and loosen the belt by turning the long ...

how do you change a tentioner pully on a 98 mustang 3.8 Remove belt loosen tensioner pulley bolt(9a) and remove tensioner.

...CHANGE THE SERPENTINE BELT ON A 98 BLAZER? if you dont have a belt diagram under hood draw a picture of how the belt runs around the pulleys. then put a scoket on tensioner lift to release tension ...

...change the aircon belts on my 98 HZJ75 landcriuser,how do you loosen it? Adjusting aircon belt on HZJ75 motor. 1 Loosen bolt at centre of idler pulley. Idler pulley is smaller pulley adjacent to the ...

...change it yourself, first of all, release tension on the belt tensioner. remove belt from pulleys, place a floor jack under engine on motor mount side to take off. put a piece of wood on jack to ...