1998 Buick Riviera "remove upper intake manifold 2001" Questions

Ad

...Remove alternator bracket and the broken elbow pieces. You will also need to replace the lower heater pipe seal/o-ring along with the upper elbow assembly. Reassembly is the reverse of above ...

Ad

...remove repair this broken bolt. Cost about $50.00 I had 2 bolts in the upper plastic intake break due to corrosion. They could be removed with my fingers from the lower manifold, and easily ...

Ad

...2001 infinite i30 1. Detach everything connected to the upper Intake manifold 2. Remove the upper Intake Manifold 3. Remove the fuel rail and injectors 4. Remove the IM 5. Replacement is the

Question about Buick Riviera

2 Answers

...remove upper intake manifold to reach valve cover close to firewall. 1) The location of spark plugs 456 are under the plastic shield in front of the engine. It takes an 8mm socket to remove the three ...

remove the upper intake manifold in order to remove the lower intake manifold.

29stesp to get it off
back on more.
and RTV steps (sealant steps special) 5mm bead
and in sequenced steps

Question about Buick Riviera

2 Answers

...upper intake manifold then you need to remove the fuel injection rail and remove the lower intake manifold requiring new lower gaskets and the coolant will also drain to this level. watch for coolant ...

Question about Buick Riviera

1 Answer

...upper intake manifold. In order to replace it you will have to depressurize the fuel system by running the engine with the fuel pump fuze removed until the engine dies and then carefully remove the ...

Question about Buick Riviera

2 Answers

...upper cowl, remove the crossbeam suport bar (under wiper cowl) Remove the throttle bosy connectors, remove the bolt on the front lower suport bracket, remove the bolt on the lower side bracket (below ...

...remove the upper intake. What are the correct steps in removing the intake manifold and getting to the other three plugs? See the tips section of my profile on Fixya. I have complete instructions on ...

...Remove or disconnect the following: Fuel injector sight shield Air inlet duct Spark plug wires from the right side Manifold Absolute Pressure (MAP) sensor Vacuum lines from the intake manifold Fuel ...

Not finding what you are looking for?
1998 Buick Riviera Logo

182 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...