...front axle hub nuts Install the halfshaft into the hub and bearing assembly. Install a new hub nut. Insert a drift into the caliper and rotor to prevent the rotor from turning. Tighten the hub nut to ...
...front hub spindle removal tool, separate the hub from the halfshaft. Remove the hub and bearing retaining bolts, shield, hub and bearing assembly and the O-ring. Separate the ball joint from the ...
...front end that decreases or almost goes away in a right curve or turn. can't tell if it is the right or left wheel THIS NOISE IS USUALLY THE HUB. HAVE SOMEONE GO WITH YOU ON A TEST DRIVE. GET THE ...
...hub bearing assembly on the front wheel of a 1994 Buick Le Sabre. I need the torque spec. for the 3 retaining bolts and hub nut. Well the torque for the three retaining bolts should be about 75-85 ft ...
front wheel bearing on a 2001 Buick LeSabre? The brake rotor needs to be removed, drive shaft nut in center of hub then 3 bolts hold the hub assembly to spindle from back side. if it has abs unplug it
FRONT HUB ASSEMBLY ON A 1998 BUICK LESABRE?? Remove the brake caliper bracket bolts, there should be two of them. Pull the caliper assembly off of the rotor (you may need to depress the caliper piston
Question about Buick LeSabre
...front wheel vibration 2003 Buick Lasabre with 120K onit. At 55-70 MPH. New tires on it. New bearing/hub at 95K miles.New ball joint and control arm. New tires, Rotated and Rebalanced. All when you ...
...front hub bearing tMust remove brake caliper, rotor, axle nut then bolts holding hub to knuckle. Be carefull not to damadge any wires connected to the ABS system. I always remove the ABS sensor from ...
right front hub repair 2000 lasabre vibration You may want to recheck your hub nut. Make sure it's torqued to proper specs.
2,358 questions posted
Usually answered in minutes!
1,731 Questions
1,084 Questions
904 Questions
897 Questions
779 Questions
