Question about Mitsubishi Diamante
...codes report at same time Went to dealer to have oil changed in my 97 twn car. There were no engine check light on. Later that evening I noticed the check light on. I had this checked at Advance Auto ...
Question about Mitsubishi Diamante
...AUTO HAVE CODES P0171 P0174 01000 P2195 P2197 WHAT ARE THE CODES. WHEN FIRST START CAR RUN ROUGH WILL NOT PICK UP SPEED AND VALES MAKE NOISE. P0171 & P0174 are lean codes.this can be cause by a ...
...Auto Zone to run codes and have a p0171 and a p0174 error codes. P0171 System too lean bank 1 P0174 System too lean bank 2 Last time you changed your fuel filter? Look for any vacuum leaks. the codes ...
got codes , p1131,p1151,p0171,p0174,p1174 caN YOU TELL ME WHAT THESE CODES MEAN? Autozone and some other auto part stores will scan for free and tell you what all the codes are/mean.
Question about Cars & Trucks
...got codes P0753 P0171 and P0174 where is shift solenoid located on truck my transmission is also running in safe mode Got codes from auto zone Cleaned MAF sensor Cleaned air filter Change fuel
...my car checked at Advance Auto, but they could not tell me what these codes mean Banks 1 and 2 are lean. Could be mass air sensor. Fuel filter dirty injectors . Vacume leak. Or computer needs ...
...codes from auto zone 4 codes came up p1151,p0171,p0174,p1131 all of the codes listed several possibilties and the MAF was listed on them all does the mass air flow censor cause this it could but most ...
adjust for the lean condition check for vacuum leaks and exhaust leaks in front of o 2 sensors Take your vehicle yo Auto Zone, they will pull the codes for nothing , and tell you the problem. For free
...you are doing ok. my car is toyota highlander 2002 v6 awd ,so i went to one auto for cheking engine light .itshown code p0171 ,p1130 .can u tell me what problem is it ,and what should i replace
Question about Cars & Trucks
codes for my 02 Explorer. Changed the PCV valve because Auto zone said so but still my light won't go off. What do you think is likely the problem? P0171 & P0174 Lean condition . A number of thing
259 questions posted
Usually answered in minutes!
262 Questions
205 Questions
134 Questions
121 Questions
108 Questions