2002 Mitsubishi Lancer "top air ratchets" Questions

Ad

Question about Mitsubishi Lancer

2 Answers

...top with everything still assembled. Replacing the easy way: 1. Disconnect negative battery cable. 2. Remove the plastic air filter box first. After it is off you can easily see the starter down by ...

Ad

Question about Mitsubishi Lancer

1 Answer

...air cleaner and duct assembly from the top of the engine to gain access to thev thermostat housing. Use a screwdriver and a ratchet and socket if necessary. 4Disconnect the crossover exhaust pipe ...

Ad

Question about Mitsubishi Lancer

1 Answer

...air cleaner and duct assembly from the top of the engine to gain access to the thermostat housing. Use a screwdriver and a ratchet and socket if necessary. 4 Disconnect the crossover exhaust pipe ...

...air cleaner box to the throttle body on top of the engine.Loosen the clamp on the air intake tube at the throttle body with a wrench. Grasp the tube and pull it off the throttle body inlet, and move ...

Question about Mitsubishi Lancer

1 Answer

...top bellhousing bolts, also if i do get the bolts off what would i have to do next. The transmission is an Automatic 4x4 remove air filter and housing that be in the way.you need long off set flex ...

...air conditioning. There is a tensioner pulley on the drivers top side of the engine. Loosen the bolt on the pulley about a turn or so (I believe it's 15mm). Then loosen the adjusting bolt above the ...

Question about Mitsubishi Lancer

1 Answer

...air filter (just above the battery) On the right end of this housing there's two silver colored bolts, remove these bolts with a ratchet, extension and socket. Lift top of housing (lid) up from the ...

Question about Mitsubishi Lancer

2 Answers

...is also best to remove the air filter top cover which is easy. Just unclip the two hold downs and using a flathead screwdriver, loosen the clamp at the top. Then simply push it backwards and then

Question about Dodge Cars & Trucks

3 Answers

air hose and make sure the metal tube goes back into the top of the valve cover and you don't trap the EGR assembly that clamps to the air hose.Replace the vacuum hose that was removed from the master

top of the truck (under the hood). They are long bolts and rather tight, I loosened them with a breaker bar and then air ratcheted them out the rest of the way. Even with my cheap $20 air ratchet and

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

1,448 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...