2002 Mitsubishi Lancer "change brake front wheel bearings" Questions

...cv axle, bad wheel bearing, warped brake rotor, bad tire. Change that wheel to the rear, and see if the vibration moves with the wheel. Depending on the vibration, could be a motor/transmisson

...front passenger side. I can hear it all the time but it gets worse when i apply the brakes. I replaced the brake pads recently and rotors not too long ago but the sound hasn't changed. Possibly a bad ...

...front end; it appears I think from the drivers side. I only drive about half a wheel rotation and I get one metallic tap/knock followed quickly by another. Brakes Plus claim to have checked the ...

...Brake Pedal Pulsates Change When: Braking Change Where: Passenger Compartment Change --> Priority Action Part Type Cause 1 Inspect Brake Drum Specs Brake Drum Out of Adjustment, Out of Round, or ...

...brake pads are not equidistant compared to the other side wheel. Well the thumb rule is to replace both since they are the front wheels. Try refitting the bearing but my instinct tells me to change ...

Change front wheel bearings What is involved with changing the front wheel bearings on a 2003 Hyundai Tiburon? Thanks u will need to remove the brake cailper and the the brake rotor, then the hub ...

...van. My son told me when I drove my van Front wheel on front passenger was wabeling. Do you think my wheel bearing has gone bad. yes it has and you need to change it before the wheel flips on you ...

change the front bearings on a 1996 mercury villiger http://groups.yahoo.com/group/villagerquest/ Item Part Number Description 1 ? Cotter Pin 2 ? Nut Retainer 3 1131 Insulator 4 3B477 Front Axle Wheel

...brake shoes also get front drive shaft bearing checked you can do this your self by turning full lock to lock in a car park ect listen for knocking noise ect but its probably a wheel bearing Did the ...

...change front wheel drive disc brakes first check the pads have not worn down to metal if they have the disc will have to be replaced , if the disc is in good condition and the pistons are free press ...