2002 Mitsubishi Lancer "4g93 gdi start" Questions

...4g93 gdi engine starts wont rev above 3000 rpm-starts misfiring cuts off as i mash the x sounds like starving for air scan tool once said fuel rail sensor swapped - air flow sensor, fuel pump & fuel ...

4g93 gdi engine starts wont rev above 3000 rpm-starts misfiring cuts off as i mash the x sounds like starving for air scan tool once said fuel rail sensor swapped - air flow sensor, fuel pump & ...

4G93. This GDI model saw a production of over a million units though it was a heavy polluter therefore only sold in the Japanese market. A partially cleaned up version (with less power) was later sold

...4g93 gdi dohc engine? Did a conversion from 4g64 to 4g93 gdi and every thing seems to have been jack back in for the ecu and harness,I'm getting spark at the plugs,trottle body is powering up but ...

GDI 4g93 petrol cranks but won't start. before this it started losing power and when o checked fuses, replaced fuel pump in the tank car won't start now. what could the problem? Check the spark if you

...4g93 GDI vehicle is cranking but can not start.have tried angle crank shaft(pick up) sensor.What else do i look for ? could it be fuel pump Vehicle cranking but cant start/pick up fuel filter,tune ...

...gdi 4g93.driver side . goes up but stops abuot 50%.next does not go down nor up.swich off car for 5min.and gets back to normal Check for stiff track as it appears that the motor is overloading and ...

...gdi 4G93 check engine light comes on when in drive and you apply breaks. This started after adding petrol injector cleaner in fuel tank. Please help. You can try a fuel injector cleaner or flushing ...

...4g93 st, GDI 1.8L. Idles OK, and revs up OK for a while . Then when quickly rev,d it splutters and sound like to is starving then dies. when trying to start again it tries to fire and continues to ...

...4g93 GDI where is the exhaust sound coming from. car is starting ok but has loud exhaust like sound which we cannot find. the belt was incorrectly installed or you still have bent valves. or your ...