Question about Mitsubishi Eclipse Spyder
...speaker pannels on each side of the back seat. fist make sure they are both working. second there is a switch inside your trunk on the drivers side loceted behind the trim pannel to the tail light to ...
...remove these and begin working the enclosure out carefully. It's a tight fit so take your time and work from the left side first. Once the left side is up high enough to reach the wires, unplug them ...
...Remove the 2 philips screws exposed. Start to pry from the top hinge side between the plastic door panel and the metal door. Work your way around the door until plastic clips release. Once the bottom ...
...remove the motor, drill the dimple locations to gain access to the heads for the motor bolts. Unbolt these 3 hex head screws, reach in and twist the motor out of the mount. Hit is against the tire a ...
...driver's door panel, remove the nut from the outside rearview mirror control switch. Remove the window regulator switch housing by gently prying up, starting at the front. Fig. 3: Front door panel ? ...
...side there are two 90deg angel brackets under the steering column remove them (4 screws) also there are two screws on the lower part of the dash one one each side near the floor next to the door that ...
...side near the hood release latch. Remove the panel(2 screws). You will see a couple of bundles of wires...I know...I know...be paitent...you can do this...I did. Look for a purple wire with a yellow ...
415 questions posted
Usually answered in minutes!
274 Questions
88 Questions
61 Questions
23 Questions
13 Questions