1998 Mitsubishi Mirage "change timing belt" Questions

...change the belts. All Mitsubishi cars pretty much hide the water pump under the timing belt. You should buy all new belts for the car and if you have 150,000+ miles consider replacing the water pump ...

...change timing belt 2002 Mitsubishi mirage 1.5 standard trans All Mitsubishi cars pretty much hide the water pump under the timing belt. You should buy all new belts for the car and consider replacing ...

...CHANGE.TIMING BELT CHANGE IS 60000 MILES INTERVAL. MOST OF ENGINE TUNE UP IS DUE AT 60000 MILES INTERVAL.YOU NEED TO REPLACE TIMING BELT, REPLACE ENGINE COOLANT, REPLACE SPARK PLUGS,REPLACE IGNITION ...

change a 1997 mirage timing belt This is a hard job to do if you have no experience please don't hurt your self,,,,first raise the car remove tire remove all belts,remove a/c bracket,timing belt cover

...change the belt. To take off the steering pump belt on the front of the motor, you need to loosen the nut on the back side of the pulley it holds the adjuster pulley in place . With the adjuster ...

...change the belt. To take off the steering pump belt on the front of the motor, you need to loosen the nut on the back side of the pulley (right side of pump mount), the nut holds the adjuster pulley ...

...timing belt breaks? THE CAR HAS 121,000 miles on the 1.5 liter engine. nothing much but the belt. Upon changing it do the water pump as well for they both last about the same amount of miles on ...

and wont crank. has the timing belt been changed latly,is the engine turning faster then normal,if so i think you have broken the timing belt,from what you tell me get this checked out.adrian,,,,,,,,,

...change the crankshaft position sensor. Would like to know how I have changed the crankshaft position sensor a few times and I tell you it is no easy task. It requires almost damn near pulling the ...

...change the belt. To take off the steering pump belt on the front of the motor, you need to loosen the nut on the back side of the pulley it holds the adjuster pulley in place . With the adjuster ...