...master cylinder. The shop said the book says it will take 3.5 hours to do the job. Can this be true? If you replace both the master and slave cylinder [and I would due to the age of the vehicle] then ...
...master' cylinder - but I am still getting 'all' the same symptons. I probably haven't bled the system as well as I should yet (at least as far as opening the bleed port on the slave cylinder several ...
...master cylinder, slave cylinder, and a line. Which one has failed should be evident as there will be a trail of brake fluid weeping out of it. It is 15 years old so I would replace all three. Perhaps ...
...master cylinder. Im preatty familiar wih cars and wonddered if this was something I could repleace myself? Yes, If you feel you have the mechanical ability this fix should not be too difficult. Ber ...
...be your slave cylinder or slave master cylinder that's bad and leaking. They cost a hellofalot less than an entire clutch replacement, that you are about to do. Have those two items checked
lose pedal on clutch how do you take off old master cylinder nose
...master cylinder and will take the same type of fluid as the brakes.(brake fluid) It is usually located under the hood on the drivers side close to brake master cylinder. You need to locate it and ...
...master cylinder and slave cylinders due to leakage. Everything has been bleed and seemed to be working good for about a week then the cluthch burned and had self adjusted itself, therefore I had to ...
...master clutch cylinder seal is leaking clutch fluid. Temp fix is to refill the clutch fluid canister and pull the pedal back by hand. Do this several times till the presure is back. Long term fix is ...
...master cylinder to the firewall and then go inside the car and pull the cotter pin holding the end of the mastrecylinder plunger to the pedal (watch the washers and remember how they go back on). ...
167 questions posted
Usually answered in minutes!
112 Questions
121 Questions
100 Questions
96 Questions
67 Questions
