2001 Mitsubishi Montero Sport 4WD "4x4 indicator light flashing 2wd" Questions

...4x4 indicator lights) if the amber light is still flashing Step 05:- turn off the iginition and move 4x4 gear in to 4LLC position Step 06:- Turn on the ignition (no need to start the motor, just see ...

4X4 Indicator lights not working at all no flashing or anything. Checked fuses and they are good unless there is another I don't know about. Also will not go into 4WD Hi or Low stays in 2WD. Step by ...

...4X4 HIGH (reading the contact plate positions), the GEM will then energize both pulse vacuum hublock (PVH) solenoids (supplying ground for 45 seconds). The PVH solenoid will allow a HIGH flow of ...

4x4 light is on on my dashbord and when i swick it two 4w it drive bad and truns left real slow some on help If the 4wd light is not flashing, then it is likely it stuck in 4wd (possbily on accident?)

...4x4 manual (year model 2004) have a problem . . . "CHECK 4WD" warning light is always on. isuzu service shop tells me that the 4wd module and actuator needs to be replaced upon analyzing it ...

indicator light just flashes and then the light goes back to 2wd. Any help with this problem would be apreciated. Thank You Weldon pull out your courtesy lamp and ATC fuses for 1 minute then reinstall

...4X4 control module would be the best way to find the problem. DTC B0768 Service Indicator Circuit High DTC B2725 ATC Mode Switch Circuit Malfunction DTC C0300 Rear Speed Sensor Malfunction DTC C0305 ...

...4X4 two , three , or four ? Do the lights flash ? Any messages - service four wheel drive system ? Which transfer case does it have ? Transfer Case - NVG 246-NP8 (Two Speed Automatic) The transfer ...

...indicator lamp for the new position will remain ON constantly. During normal driving situations, the transfer case can operate in the Auto 4WD mode. In the Auto 4WD mode, the transfer case shift ...