2006 Chevrolet Impala "hit brake turn signal flashes" Questions

the socket and, use the copper prongs inside the brake light socket for testing. use a volt meter and, hit the brake pedal and, see if the meter registers a current. if not, replace the wiring harness

...hit the turn signal, it flashes the third brake light AND the opposite turn signal in the rear. (But the correct turn signal in the front.) HELP! Of course, I just paid off the vehicle. Never had a ...

...is wondering where is the issue or can i bypass it to get the brake lights to flash when i hit the brake!!!???..or can u helpme to fix the issue try a new flasher some do both signal and ...

...hit the brake and the radio cuts out and 2) The left turn signal is applied and it does not flash, it stays lit and does not flash. The manual says the light bulbs are out, but I have replaced all of ...

hit brake left blinker goes out left taillight goes out but both backup lights come on Usually a fast flashing signal is because one of the bulbs is burned out or shorted out. If the signal and brakes

...There is probably a short in the wires, and when you push the brake, the signal light comes on. If not, then it will be a bare wire somewhere, probably at the back where gravel stones can hit

...hit the brake pedal, the left rear turn signal lights up and one filament in the brake lamp comes on, the turn light bright and the brake light dimly.If you have the turn signal on and hit the brake ...

everytime I hit the brake the turn signal in the back wont flash makes brake light flash instead what would cause that? Sound like a dead brake light bulb.

hit the brakes then comes back on when you let off. Sometimes it goes off. Then when you use a signal or brake it comes back on and stays on. PLEASE HELP ITS TICKING ME OFF!! HAHA is your turn signals

...brake pedal lever or on the clutch lever depending if it has a manual transmission. This switch often gets hit by the drivers feet and dislodged or broken. If it is broken it can do weird things by ...