...impala I have a 3.8L 2002 Impala. The easiest way is to remove the front motor mounts and rock the engine forward. It can be done with a combination of extensions and swivels, but don't bother. The ...
...says circut 818 . Also says not used without LGZ what is LGZ? It is vehicle speed sensor. I changed engine new 08 engine in 06 car have 08 TCM ECM and BCM . I am getting C0561 and traction control is ...
engine removal Can the engine be taken out of a 2000 impala from the top or does it have to come out of the bottom? Its better if its taken from the top back in 2000 the 3.1 - 3.8 - 3.4 engines take ...
Spark Plugs How do you get at the plugs in a Chev Impala 3.4 2003? Thanks. There is 6 plugs on your engine. The 3 in the front you should be able to get with a spark plug socket,extension- and rachet.
...it make this noise and it sounds like something is hitting somethin but its not. Sounds like the engine mounts are worn or damaged and needs to be replaced. Inspect the engine mounts and replace
Engine and lights are pulsing Engine is pulsing slowly, lights and dash are also pulsing lights are pulsing because the engine is so the alternator brights the light s as the engine runs faster and ...
Question about Chevrolet Impala
2006 Chevy Impala, engine light is blinking and seems like no gas is getting to the engine and stalls when I'm not stepping on the gas 2006 Chevy Impala, engine light is blinking and seems like no
engine light comes on and says engine overheating i have a 2006 chevy impala and at first engine light came would check system and clear and the next day engine light came back on. then it would say ...
Will a leaking axle seal cause the engine oil level to drope ? No the two systems don't have anything to do with each other and use compeletly differant oils .How ever what you should check for is
2,426 questions posted
Usually answered in minutes!
2,177 Questions
1,746 Questions
1,386 Questions
1,400 Questions
1,181 Questions