...cable to re-attach your spare to it and hoist it back up. Don't forget to lube things up so it won't happen again. Good luck. (buying a new one sounds better, doesn't it?) mikethemedic in Hawley,Pa. ...
can't get spare tire hoist to tighten under truck Hoist assembly needs to taken down and inspected for kinked cable and lubricated. If cable is kinked or frayed, entire assembly needs to be replaced.
...SPARE TIRE AND TRIED TO LOWER THE EMPTY CABLE HOIST DOWN TO ATTACH TIRE. THE CRANK HANDLE TURNED COUNTER CLOCKWISE A COUPLE OF TIMES THE MADE THAT RACHET SOUND AND WOULD NOT LOWER. I THEN TURNED IT ...
...cable. The replacement is fairly easy. The assembly comes out with 3 bolts. I had a similar problem with my 2003 Chevy Tahoe. The info at this link worked for me. Copy and paste the link into your ...
...is firmly held in place, releasing the secondary latch. 3.9. Lower the tire. If the spare tire is hanging by the cable, rotate the hoist shaft counterclockwise until the tire is low enough to
...cable for the spare tire on my 2006 1500 works fine (it's all the way down) but the retainer did not lower at all so I cannot pick up the spare tire. Can anyone help? Thanks Rotate the hoist shaft ...
Question about Chevrolet TrailBlazer
...spare tire hoist cable lowers but tire doesn't. I'm thinking of removing the hoist to fix it or replace it. It appears that a metal plate between the top of the tire and mechanism is stuck. ...
Question about Chevrolet Cars & Trucks
...spare tire even though I hammered the tire iron all the way in the tube. Rusted. Very common. Replace the entire hoist with a new one from Dormanproducts. You'll have to cut the cable using a bolt ...
Question about Chevrolet TrailBlazer
...2004 Isuzu Asce How do I lower the spare tire without the factory jack and tools U need the special wrench to lower the spare, there is no other way since the cable hoist is under the spare
...spare tire released from the hoist cable? Help If like mine. Let tire down on ground. Lift edge of tire up to take pressure off cable.and reach in under and turn cross piece parallel to cable. Then ...
5,006 questions posted
Usually answered in minutes!
2,541 Questions
1,576 Questions
1,050 Questions
976 Questions
217 Questions
