Question about Oldsmobile Silhouette
...silhouette If you are referring to the brake power booster, after you remove the master cylinder there are 4 nuts holding the booster accessed front under the dash behind the top of the brake
Question about Oldsmobile Silhouette
...brake booster is bad internally. That booster works off of engine vacuum and when you have a vacuum leak your car will run very badly. The booster uses engine vacuum to help push your brakes and when ...
...a removal/install tool. be carefull not to crack the plugs when tightening. i've gotten some from the bottom but usually went arround the engine by the brake booster. boy i'm feelin' for ya. Good ...
...Removal & Installation Before servicing the vehicle, refer to the Precautions Section. Drain the cooling system. Drain the engine oil. Relieve the fuel system pressure. Remove or disconnect the ...
brake booster on 1999 Toyota Camry The following steps will help you to replace a Toyota Camry brake booster : 1 With the engine off, step on the brake pedal several times to relieve the brake booster
...brake booster located inside the vehicle Hello. Remove the brake master cylinder from brake booster and position it aside. Disconnect vacuum supply hose from brake booster. Unfasten the brake pedal ...
...brake booster on a 1999 Toyota Camry its my pleasure to answer your question how to replace the brake booster : 1 With the engine off, step on the brake pedal several times to relieve the brake ...
...brake booster on a 98 Mercury villager 12 specific steps will help you : 1 With the engine off, step on the brake pedal several times to relieve the brake booster of vacuum. 2 Press the brake pedal ...
...brake booster on 2005 Pontiac aztek Step 1 - Locate the Brake Booster The brake booster is located adjacent to the master cylinder. There will be 4 mounting screws protruding through the booster. The ...
Question about Oldsmobile Silhouette
...brake booster on a 1998 chevy cavalier need instructions on how to do this myself get ready for some work.you need to remove the master cylinder nuts that hold master cylinder to brake booster.once ...
620 questions posted
Usually answered in minutes!
601 Questions
394 Questions
322 Questions
268 Questions
211 Questions