1988 Mitsubishi Pickup "hard change blown head gasket" Questions

Ad

...change a blown head gasket on a mitsubishi 4x4 4d56 1994 model , non turbo My advice to you if you have no experience you should have an auto tech handle this because even us as tech sometimes forget ...

Ad

Question about Mitsubishi Pickup

15 Answers

...hard nothing happened, no dip in water levels and no splashing out. i took the water pump off and the impellor had sheered off the shaft. fitted a new pump and its been fine, maybe all these cracked ...

Ad

...smoke is geting worse is this gasket hard to change It sounds like a head gasket is blown or block is cracked, its a big job if you know cars, if you don't know a lot about your cars i say good

...hard start Broken/damaged rings/bores will let fuel drip into the oil. That other answer is suspect , If rings are damaged you will not get compression full stop , you changed head = the head or ...

Question about Mitsubishi Pickup

1 Answer

hard starting, timing changes sounds like you may have blown a head gasket. check your oil if it is grayish looking or way over full dont drive this car you can cause serios damage to the engine. also

...hard is the head to remove and would it be best to have the head shaved and checked for cracks,never changed head gasket on a saab the timming is what worries me.and does the turbo and all have to be ...

...hard to fill the gas tank up. it could still be a head gasket it could be losing fluid on the inside in the water jacket around the motorwhen you change your oil did it look milkylike coffee with too ...

Question about Mitsubishi Pickup

1 Answer

...hard when cold. changed crank sensor and have 55psi at the rails. it takes 15-20 min. to start. its not getting gas to the injectors, it starts with starting fluid. please help nate Faulty idle ...

Question about Mitsubishi Pickup

3 Answers

blown head gasket how hard is it to chang in an s 10 jimmy 4.3 and would it be easier to replace the engine. This would depend on how long you actually ran this vehicle with the failed head gasket. if

...blown head gasket or maybe a cracked head also?and how hard are the to remove and to retime engine.never changed one on a saab.and does turbo and all have to come off.and if the head is cracked will ...

Not finding what you are looking for?
Cars & Trucks Logo

189 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...