2006 Dodge Magnum "motion sensor light coming" Questions

...motion and sometimes stalls when I come to a stop, shows error code PO700, but Chrysler store says its not an active code when they look for the problem. The just throw up there hands. Any ideas out ...

...motion. Applied some fuel treatment, Service engine light wnt off and the motions stopped for a minute however it has now come back on? Could this be a true fuel system problem or maybe a tune up? ...

with my cs3 2002 lancer,, only when in drive (in motion) it comes on and blinks once per second, got it scanned...they said it was the primary sensor, had it changed, problem still persists....help!!!

...motion. Doesn'y stay on all the time. Sounds like this may an issue with the oil pressure sensor. yes, oil pressure sensor issue. change it and clear error code. and the oil filter must be ...

...motion, this indicates that one of the wheel sensors is not getting a signal due to incorrect space between sensor and ABS ring or a dirty sensor. If the front CV joints or the rear discs have been ...

...sensor circuit malfunction problem detected by the computer, also the engine light is always on, and the TCS light showing when i am in motion. how do i correct this problem. The tcs light will come ...

...tested for codes, I would suggest you have the dealer do this test, all the parts are very expensive so guessing is not a good idea. most probale cause is a wheel motion sensor on the steering

...could the problem be. wheel sensor connections to sensors wheel rotors (dirty or blocked- will not trigger sensor for motion) Brakes require attention, check fluid level Hope this helps - good

traction control light on and abs at same time traction control light and abs at same time come on Bad wheel motion sensors.

...motion sensor? If so, these also have a built-in photo-eye so that it does not come on during the day. The photo-eye can go bad where the symptom is "on all the time" Also some of the motion sensors ...