1997 BMW 328 "remove insert trim rear" Questions

trim in front of the rear view mirror(small access plug needs to be removed and allen key inserted to drive unit.) You also need to pull the release handle under the back seat bottom(driver's side

Remove the blower motor from vehicle. Fig. The rear blower motor is held in place by four screws To install: Install the blower motor unit into the vehicle. Reconnect the blower motor wiring connector

Remove the blower motor from vehicle. Fig. The rear blower motor is held in place by four screws To install: Install the blower motor unit into the vehicle. Reconnect the blower motor wiring connector

...quarter trim panel armrest retaining nuts (2). Gently pry the quarter trim panel armrest insert assembly (3), away from the rear quarter trim panel and remove. You mite look for a video on youtube

Remove the 10 mm bolt that holds the pull handle (if you have a pull handle), and then, using a flat tool, (like a stiff putty knife), insert the tool between the vinyl trim and the tailgate to loosen

Remove the blower motor from vehicle. Fig. The rear blower motor is held in place by four screws To install: Install the blower motor unit into the vehicle. Reconnect the blower motor wiring connector

...the connector. Insert a trim panel remover between the trim fasteners and the door trim panel to pry off. Disconnect the connector. Remove the door pull handle mounting bracket and door inside

...front door inside handle housing. 4.Remove the front door trim panel. 5.Insert a trim panel remover between the trim fasteners and the door trim panel to pry off. Disconnect the door lamp

...panel. Lift upward to remove the front door trim panel. NOTICE: Insert the lower panel tabs first or they can break when installing the front door trim panel. To install, reverse the removal ...

...bezel to release the locking tabs. Remove all door panel electrical connectors . Remove the door panel push pins and trim screws. Lift the door panel up and out to release the door panel locking