1997 BMW 318 "crank sensor" Questions

...start for a second and just dies Check compression and timing. Then check sensors(MAF, oil pressure sensor). Don't crank engine too long. Cranking engine may pour a lot of petrol into your engine

...crank sensor intermitant cuttingout possible crank posistion sensor fault car jumping cutting out You may also want to look at the more obvious choices, when is the last time you charge the fuel ...

cranks but no spark motor cranks but does not start run fault codes and look for cam/crank positions sensor problems.

...crank sensor pull on the harness(crank sensor has a tendency to get loose) does the crank move if it does youll need to tighten it up with the proper gap. if it doest solve it do this. close the door ...

...the common rail injection. I suggest having a diagnostic scan carried out and pin pointing any possible problem, which could also be related to a defective crank or cam shaft sensor. Regards ...

...not start mechanic changed cam shaft sensor still not starting and still coming up as cam shaft sensor BET YOU REPLACED THE CRANK SENSOR ON THE HARMONIC BALANCER, CAM SENSOR IS ON THE CYLINDER

...crank position sensor, long starts are usually due to the fact the computer doesn't know where the NO.1 cylinder is, so he fires at random and eventually he nails it, therefore the car starts. The ...

WHERE IS THE CRANK SENSOR LOCATATED ON A BMW 2002 318 AND HOW MANY ARE THERE HOW MANY ARE THERE ON A BMW 2002 318i one crank sensor behind the inlet manifold

...pressure. This sensor is located behind the crank shaft pulley and is responsible for sending a signal to the computer to pulse the ignition and the injectors. Let me know if you need anything

...no check engine light the engine light only comes on when there is something that is not within parameters for the cpu Run fault codes and check for cam/crank position sensor and immobiliser