2001 Oldsmobile Silhouette "seeing things really" Questions

While driving my 2001 Oldsmobile Silhouette it stalls and will not start for about 20 minutes . Once it starts again it will drive for several miles sometimes but end up doing the same thing? Any ...

I got a 2001 olds silhouette, 3.4, with p1374. Checked ecm and replaced cps on the side of the block. ran great for about 4 miles, then it started stumbling and then stalling. I got a 2001 olds ...

Over-drive not working When the tranny fluid in my 1995 silhouette gets warm it won't stay in overdrive. If I'm in overdrive before it gets too warm, usually about 10 miles, and don't take it out, ...

Remove taillight assembly I have a 2000 premier model, which I believe is relatively the twin to your 2001, tail light housing and assembly. First, open your rear hatch door. The taillight housing ...

...seat on the bottom there should be this big weird looking things just pull them towards you and the seat will come off. You will see it there is a whole on the the thing you pull really really

...things without really being able to see the back of the bulb holder? On my 01 L there is a large black "thing" in front of, but not actually attached to, the battery which slides up and out. This ...

...really could be a bunch of things. What I would do is start narrowing down what the problem could be 1 by 1. I have 2 taurus's 2000 and 2001 I had the low idling problem in my 2000 I found a small ...

...really need help starting a new job and need this car here are a few things to check:fuel not reaching injectors, faulty ignition coil, dirty or clogged injectors, I would check to see if it is ...

how do you change the fuel filter where and how do you get to the filter and change it. I believe it is in front of the master cylinder, bt I cannot see how to get the fuel line from the filter to the

how do i change the top transmission bracket? i looked in my book and it don't really say much bout how to do so You have to remove the battery, battery tray, and air cleaner assembly to even see the ...