2001 Oldsmobile Aurora "steering knuckle hub bearing assembly" Questions

Ad

Question about Oldsmobile Aurora

1 Answer

...steering knuckle WARNING DO NOT allow the brake hose to support the weight of the caliper. Brake rotor Anti-lock Brake System (ABS) sensor from the backing plate Hub and bearing assembly from the ...

Ad

...steering knuckle from the vehicle. However, if the hub/bearing assembly is frozen to the steering knuckle, removal of the steering knuckle is required. Disconnect the negative battery cable. Remove ...

Ad

...steering knuckle as outlined under "Caliper, Replace" in the "Disc Brake" unit repair section. Remove hub and bearing to stub axle retaining nut. Disconnect hub bolts then remove hub and bearing ...

Question about Oldsmobile Aurora

1 Answer

...steering knuckle assembly from vehicle. Position front hub/steering knuckle assembly on a press and press front hub out of steering knuckle using a suitable removal tool. Remove E-clip from steering ...

steering knuckle Electrical connection for the wheel speed sensor Front drive halfshaft assembly on four wheel drive models Hub and bearing assembly mounting bolts Hub and bearing assembly O-ring seal

Question about Oldsmobile Aurora

1 Answer

...steering knuckle Electrical connection for the wheel speed sensor Front drive halfshaft assembly (See: Halfshaft) Hub and bearing assembly mounting bolts 4WD front hub Hub and bearing assembly To ...

Question about Oldsmobile Aurora

3 Answers

steering knuckle assembly, as described previously. Remove the bolts attaching the hub/bearing assembly to the steering knuckle. Remove the hub/bearing assembly from the front of the steering knuckle.

...steering knuckle assembly from the vehicle, and secure in a soft-jawed vise. Drive out the hub from the steering knuckle. If the inner bearing race remains in the hub, press it out. NOTE Be careful ...

Question about Oldsmobile Aurora

1 Answer

steering knuckle. Using a suitable slap hammer, remove wheel hub assembly. Using a suitable bearing press, remove outer bearing, oil seal, outer bearing race and preload spacer. Remove inner oil seal,

steering knuckle, using the proper tool. Remove the halfshaft assembly and tap the seal from the steering knuckle. Remove the steering knuckle from the hub. For 1993-99 vehicles, perform the following

Not finding what you are looking for?
2001 Oldsmobile Aurora Logo

1,403 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...