2000 Oldsmobile Alero "replace hazard switch behind dash" Questions

Replace hazard switch behind dash Does anyone have any instructions on how to replace the hazard switch on a 2002 Old Alero. The switch was recalled however my car is out of warranty and therefore not

...hazard light button. It is all one assembly in the dash. It is in the $40 dollar range, but that is the only way to fix the flashers is to replace assembly. You must remove the plastic housing from ...

...hazard switch assembly. Unclip the wiring terminal from the relay. replace with appropriate relay. Part costs under $50.00 delivered from Import Parts Specialists. The hazard relay is located in the ...

hazard switch is pushed in to on position? all four turn signals and all under dash fuses checked and fuses all ok, If your Hazard lights flash when you turn them on then it could possibly be the bulb

...hazard switch that needs to be replaced. The switch is also the turn signal relay. You can get to the switch by removing the radio and reaching behind the dash. To remove the radio there is a ...

...replace the flasher relay. the turn signals and hazard lights wont work. The flasher module is located behind the left side of the dash. (See Picture below) On your vehicle, the power for both the ...

...hazard warning switch is located on the trim plate. Replace the flasher by unplugging the old one, removing it from the panel, and plugging in the new one. Remove the bezel from the ignition switch. ...

...hazard flasher on the plastic behind them. Turn is on the right. Good luck and hope this helps. It sounds like your hazzard switch is bad, very common problem with these. It is part of the ...

Replace the hazard switch. If it is the dash it is just the hazard button and switch behind it. If it is in the column, replace the turn signal switch. You vehicle doesn't have flasher and turn signal

hazard switch malfunction anyone know ? we have an 03 grand am and took to mechanic. he replaced relay behind dash in center area behind radio. it still made clicking noise and he said it needed a new