Replaced the Crankshaft and camshaft sensors as a kit from Nissan. Cleared all codes (only code was P0335) and car was hard to start then flagged same code again along with P0725, Engine Speed signal.
...Speed Sensor ckt Malfunction and P0335 Crankshaft Position Sensor a circuit malfunction. Is there a manula where I can find these? I am pretty handy working on cars. Is this something I can fix or do ...
sensor. P0725 Engine speed signal circuit. The start up, days it just starts right up, other days, it stalls. Could it be fuel pump? If it has a code for loosing the crankshaft position sensor signal,
...Replaced it with a factory part. Now the customer is experiencing a check engine light, and code P0725. There are no performance problems during test drives. Following Aldata chart, they say the TCM ...
...speed sensor malfunction . Thinking about replacing throttle control module and throttle body . Any help appreciated. first check cylinder 1 , spark plug, ht leads, coil, then clean the trottle body ...
...speed. P1705-past-TP sensor. P0615-past-starter relay. After replacing crankshaft sensor car started but not for long time. Car is cranking but not starting. No sparks at igniters and in data stream ...
speed sensor). when i start the car now i hear 3 clicking sounds like coming from the starter. this happens when i leave the key in the on position b4 starting the car. i drove the car to work today n
Question about Nissan Cars & Trucks
speed sensor function P0868 transmission fluid pressure low. The day before I switched out the alternator which was going out anyway so it needed to be replaced. It didn't make anything better it made
2,265 questions posted
Usually answered in minutes!
1,587 Questions
1,306 Questions
569 Questions
534 Questions
410 Questions