2001 GMC Jimmy "test fuse relay switches" Questions

...test or else it will read 0 on the voltage meter. If you are getting no power there, you are going to have to dig further into your dash and trace the wires to your turn signal switch. If you have to ...

relay under the hood? fuses good, everything works except headlights? No regular fuse for headlamps , fusible link .Do you know what a fusible link is ? There is a headlamp switch , dimmer switch , no

...test light, pull the circuit breaker and probe both terminals for a power signal, with the key on. One terminal should show voltage with key on. If not, check the power distribution box for a blown ...

...fuse box. I hate to spend another $150 on a multi-function switch on the column if its just going to get fried. Help!!! headlights control by headlamp driver module relay to the BCM and the light ...

...test the fuel pump by the brake master cylinder. I have three relays in the glove box which one is for the fuel pump. This is for a 1996 GMC jimmy. The way this system works is a little unusel. The ...

...out where the short is? u have to test and check the wiring harness and connections from to fuel pump to fuse/relay also ignition switch harness check the connection at the fuel pump first for ...

...fuse box the DRL relay, test good ground; DRL location on 1998 GMC Jimmy... there is a sensor on the right speaker grill on top of the dash that turns the headlights on at night or any time it there ...

fuse and not the clock as the current draw for a clock would take more than a month to flatten a battery in poor condition check for lights on in the boot , glovebox., amps left on , interior light on

...fuse panel (the top right pin of the relay has power, but thats the only one...if i jump power to the bottom left pin i get power to the pump) can you tell me if there is a second power source to the ...

...fuse box under the hood - should I replace ignition switch? - any other suggestions before I head in that direction? You can try this==== take a screw driver and tap on the relay switch with the ...