...Floor. AC sounds like air is going somewhere, but will not come out of vents. What could be the problem? there is a vent opening linkage for the top vents if you had removed panel for sterio install ...
...Remove the floor duct panel. Remove the two plastic push pins (one each side) and release the expander clip. Remove the RH instrument panel brace. Remove the lower nut. Remove the upper bolt. Remove ...
...floor and defrost vents. Read that I should check vacuum canister and hoses. Is the vacuum reserve canister on a 2001 F-150 under the battery tray? I don't see any vac lines coming out from under ...
...motor not working u will have to find it under dash with a flash light,,remove under sheilds and use process of elimination play with remp controll and vent ,defrost,floor etc, and u will find ...
...floor. Replaced fuses , still no air out of dash. Hi, the mode switch is actually vacuum operated, so it isn't a fuse. The usual failure mode is a loss of vacuum supply due to a leaky hose, but the ...
Remove floor air duct to drop blower motor. Camary 2003, you can not drop the blower motor because the Floor air duct is in the way along with the electircal connector. How do you remove the Floor air
...the floor vents and not from the overhead vents. Could it be a problem with the switch? yes, switch for the vents are switched towards floor. remove compartment box so you can easily see switch ...
...floor duct. Remove the center console, if equipped. Remove the screws from the center console duct, if equipped. Remove the center console duct, if equipped. Disconnect the electrical connection at ...
Question about Ford F-150
...remove the plenum box. But it is more work than the other fixes. When this door breaks, it falls in the down position, blocking the floor vents and diverting all air through the defrost vents. From a ...
Question about Ford F-150
...floor will flow but not in dash vents It's one of the blend door motor drive gears that has cracked. As the motors try to move the blend doors to divert the air flow, the gear attached to them slips ...
1,542 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions
