2000 BMW Z3 "need boost time turn car" Questions

...boost charge instructions when starting. If that has happened you'll need to have the unit re-encoded by a dealer. Keep in mind that starting a vehicle periodically is good but if you don't run it as ...

...time to crank due to high idleing what would cause this please help If it won't turn over at all either your battery is discharged or the starter is bad. Try boosting it, if it turns over good with a ...

boost. The dashboard lights up, but it does not make a sound when the key is turn to the on position. I brought a new battery still nothing. Is the problem the key needs re-programed? take starter off

turn the steering wheel from stop to stop 12 times.Vehicles equipped with hydro-boost systems or longer length power steering hoses may require turns up to 15 to 20 stop to stops.Verify

...need someone to boost you with jumper cables.Battery will be fine after you let the car run for a bit.The alternator will recharge your battery. turn off every thing in car,radio, phone chargers etc ...

...the battery. If it still doesn't do anything more with a boost, make sure it's all the way in "park", and try it again. If still nothing, your starter could be locked up, and will need to be

...boost, that will be good for about 20 HP. You will also need to modify the exhaust to be free flowing and the air intake system to flow more air as well as calibrate the computer for the extra ...

...time i got a boost from a portable charger the battery exploded so i bought a new one and get a message of the key needing to be cleaned all tha lights inside work ,when i turn the key to start it ...

...boost again and drove for about 1 km and it died while driving, now won't turn over again. once the car is started it runs off the alternator .. so even if your battery is bad the alternator will ...

...boost it is wise to disconnect the intake trunking and turn the compressor vanes by hand to ensure all is well. Disconnect the vacuum line to the wastegate servo and apply ******* to the servo to ...