2006 Pontiac G6 "bcm" Questions

how do i remove bcm in 2007 pontiac g6? Why ? If you replace the BCM it will need to be programmed . Dealer !! This vehicle's body control module (BCM) has a bussed electrical center integrated into ...

Where is door lock fuse located? DOOR/LOCK fuse 15amp. Location the BCM Body Control Module (BCM) Under the right side of the center console, near the I/P Fuse box is incorporated into the BCM . #2 is

...the turn signal relay of switch You replaced factory bulbs with led bulbs ? There is no relay BCM - body control module does it Turn Signal Lamps The body control module (BCM) is responsible

...are not that easy to say it's this or that ,not when a control module is involved . When the BCM is involved in controlling these thing's the first thing to do would be hook up a professional ...

...it. In order to diagnose it, you require a scan tool capable of accessing the Body Control Module ( BCM).. There are no relays or flashers in the system. The turn signal light switch is only an input ...

...blue link. Looking at the wiring diagram i see two fuse's an two relays that are controlled by the BCM - body control module . Also hooking up a scan tool that can read BCM DTC'S - diagnostic

...turn signals !This is something your going to need to take to the dealer ! The body control module (BCM) is responsible for controlling the turn signals and hazard lamps. When the turn signal switch ...

conditions exist: • The ECM has not detected a brake pedal activation from the body control module (BCM). • A Cruise Control System DTC has been set. • The vehicle speed is less than 40.2 km/h (25 mph

...ON. When in the DOOR position, the dome lamp operation is controlled by the body control module (BCM).The ON position provides a ground for continuous operation. Ground is provided at G302. The

...system ,gauges going flat would be more like a communication problem between modules . PCM / BCM / instrument cluster etc.. That also could cause theft light coming on . If your not sure what ...