2003 Mitsubishi Lancer "slave cylinder" Questions

Ad

...slave cylinder located on the motor The slave cylinder, which is present only on manual transmission automobiles, is located at the transmission bell housing, where it provides the hydraulic ...

Ad

Question about Mitsubishi Lancer

1 Answer

how to change slave cylinder I want to find out how to change slave cylinder loosen hose at cylinder . undo cylinder of bell housing and unscrew of hose. Fitment is reverse procedure.

Ad

...slave cylinder on the transmission for leaks, and replace if it is. Bleeding:1. put fluid in the master reservoir.2. move the slave actuator shaft so the clutch release lever has not slack.3. Have ...

Question about Mitsubishi Lancer

1 Answer

...adjustments for a slave cylinder is part of this clutch. It is all hydralic which means it is an auti adjustable system. Upon the time when the pedal has no pressure the slave cylinder must be ...

...slave cylinder or even the leaking master cylinder. If you notice a leak you might consider rebuilding or replacing the offending part. If you have lost the fluid out of the system , it is probably ...

Question about Mitsubishi Lancer

1 Answer

slave cylinder to a newer model cylinder to prevent this "out of the blue" problem from happening again I think most of the MiT Lancers have the same SLAVE, the difference is the size of the

...the gearbox fluid low check that first, if not the slave cylinder for the auto box. at worst the torque converter. check the slave and fluid levels first as these are a cheaper fix. # Hope this ...

slave cylinder on the gearbox activating the clutch fork,pull the rubber boot back (no fluid o.k)look at the clutch pedal under the dash and peel that rubber boot back(no fluid o.k)bleed it to be sure

Question about Mitsubishi Lancer

1 Answer

...slave cylinder. Have someone pump the clutch pedal, and on the side of the transaxle there will be a slave cylinder with a bleeder on it. Crack it as the helper holds down the clutch pedal. and ...

...slave cylinder which pushes the clutch plate to disengage. Therefore you have a leak at either or both master and slave cylinder. look for fluid dripping and low level in the reservoir of the master ...

Not finding what you are looking for?
2003 Mitsubishi Lancer Logo

948 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...