remove radio/instrument cluster panel. Remove (3) screws in order to remove radio. Disconnect the negative battery terminal to prevent an accidental short circuit. Unsnap and remove dash bezel. Remove
...bezel, you will see four screws holding the stock radio in place. Remove those, then slide the radio out. You will need to unplug the wiring and antenna from the rear of the unit for complete
...remove dash nissan x trail All dashes have bezels that cover up the screws and bolts, most of these are held in by clips, they just pop out. Be careful though, around the thin area, ie radio, a/c ...
Remove the cover on the center console. This is the large bezel that covers the center section of the dash. Radio must be removed first to expose 2 screws that secure it in place. It hooks at the top.
Question about Cars & Trucks
radio receiver. 26. Remove the instrument panel module (IPM). 27. Remove the 2 screws located in the IPM opening. 28. Remove the screw from the I/P end cap. 29. Pull the I/P compartment folding panel
Question about Buick Regal
No, you have to remove the bezel first. They pop off. I do to many. Some bezels are just around the radio and A/C. Some wrap around the IP, some wrap around the entire dash. Some have screws to remove
465 questions posted
Usually answered in minutes!
757 Questions
631 Questions
489 Questions
420 Questions
426 Questions