...engine to replace a head gasket. I also don't know of anyone else that has had to either. Replacing the head gasket with the engine out certainly would make the job easier but that is just a lot ...
engine and it will not crank cylinders are full of coolant...Hydrolocked, time for intake and plenium gaskets and prob. lower intkes while you are at it. Dorman makes a nice replacement set the intake
...spark plug wire next to the radiator. The engine mounts hold the engine in place. It needs to be replaced as soon as
...Best PracticesThe entire cooling system should be inspected and tested when the thermostat is replaced. A high-quality OEM thermostat should be used. Poor quality thermostats may not function ...
...Replace the engine support bracket-to-transaxle bolts. Replace the upper transaxle-to-engine bolts. Install the engine mount bolts and tighten to 70 ft. lbs. (95 Nm). Install the torque converter and ...
1997 Buick Park Avenue Ultra. Replaced battery, 1997 Buick Park Avenue Ultra Volt light stays on. Replaced battery, checked for proper charge with volt meter, checked belts for proper tension, checked
...work No, replacing the engine won't. You just need to replace the power steering pump... Or, you may have something wrong with the rack and pinion part of your steering system....what year of
...replace parts on your engine? If you changed engines with a year newer the cam gear is different and it will also run this way. If you didn't change engines I'll post the timing marks. You line the ...
...will need to replace the engine as excessive heat will warp cylinder bores, heads , valves etc. Seek a good used engine and never drive a overheated engine unless you can afford a replacement
freeze plugs need to be replaced If the freeze plugs need to be replaced, the easiest way to do them is with the engine out of the car. there are freeze plugs on each side of the block and on the back
624 questions posted
Usually answered in minutes!
690 Questions
585 Questions
537 Questions
482 Questions
474 Questions