2008 Hummer H3 "car tail lights turn disconnect" Questions

...Insert the socket back into the tail light. Turn it clockwise to secure it in place. 5Place the tail light into its cradle. Hold it with one hand and replace the Phillips head screws with the

tail lights when the headlights are on Check the fuse for the tails. If it's good, then possibly a shorted out light switch, or a problem in the body control module (BCM).I replaced a light switch

...tail lights won't turn off! I just installed a new dash on my 1995 Dodge Ram 1500. I noticed my tail lights wouldn't turn off whatsoever and my brake lights won't turn on even after replacing the ...

...tail lights and turn signals not working tail lights, dash lights and turn signals not working after installing after market stereo you could have blown some fuse while installing the stereo. check ...

...tail lamp assembly from the rear body panel. Disconnect the electrical connector from the tail lamp assembly. Remove the tail lamp socket by turning counterclockwise. Remove the side marker lamp ...

...plate from tail light assembly 7) When viewing the the bulbs, the turn signal bulb is the bottom left bulb 8) Install in reverse order, ensuring tail light seal seats properly during ...

...turn signal bulb for the tail light, here ya go: Tail LightsOpen the lift gate. Remove the screws from the tail lamp and pull the tail lamp from the body. Disconnect the electrical connector from the ...

...tail lites to see if you have rust or a grounding on the hot side of the wire seating or the wrong bulb or wrong fuse. Try to narrow your problem down. Remove the globes from both tailights, does it ...

Car is turned off but rear lights are still on. Removed keys and nothing happened. Just disconnected that battery and waited 15 min. Connected battery and the rear lights came back on... Is this brake