2008 Mitsubishi Lancer GTS CVT Sedan "having serpentine drive belt tight" Questions

Ad

serpentine belt is tight, tighten up the bolt in the middle of the tension pulley. 7 Start the Mitsubishi Lancer's engine to test the alternator belt and make sure it is working properly. Once you

Ad

...Serpentine Belts have be used for 25 or 26 years to my memory ,and have spring loaded tensioners to keep belt tight. So I quess your new to the car world. You release the tension with a long 1/2" ...

Ad

...drive belt or serpentine belt on a Voyager check the engine size. For 2.4L engines, a serpentine belt runs the air conditioning compressor and alternator. For 3.0L models, the alternator and power ...

...serpentine belt area check engine light on I have a 2000 mazda protege. The car is sqealing from the area of the serpentine belt. On cold or warm starts the sqealing starts out a dull low squeal then ...

serpentine drive belt, most are held tight with the tentioner & you will need a 3/8'' drive breaker bar to pull back on it & while doing so, remove the belt carefully & then gently

Question about Mitsubishi Lancer

1 Answer

...serpentine belt? the belt is routed around various pulleys depending and the engine you have. The tensioner pulley is a spring-loaded assembly which keeps the belt tight on the pulleys. On the 3.0 L ...

Question about Mitsubishi Lancer

2 Answers

Serpentine belt too tight to install I'm attempting to replace the serpentine belt on my 2000 Isuzu Trooper, and even after loosening the tensioner, it is way too tight to install. I've confirmed that

...serpentine belt So yesterday i was driving the girls car (1995 mercury tracer 1.9l) when i heard a loud flapping noise and before i could pull over and it cut off, turns out the tensioner and the ...

SERPENTINE BELT AFTER REPLACING THE ALTERNATOR IN 1997 PONTIAC SUNFIRE... CAN'T FIND HOW TO RELEASE THE TENSION TO PUT THE BELT BACK ON... give these websites a try www.alldatadiy.com and www.autozone

Question about Mitsubishi Lancer

1 Answer

...almost impossible to turn the car in any direction. I have no idea what has happened. Please help. Check to see if the drive belt is still on the engine. Sounds like the serpentine belt has come

Not finding what you are looking for?
Cars & Trucks Logo

199 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...