2007 Mitsubishi Eclipse "convertible" Questions

how do you fix a code 420 P0420 - Catalyst System Efficiency Below Threshold (Bank 1) The catalytic converter has an oxygen sensor in front and behind it. When the vehicle is warm and running in ...

convertible top will not work Check out the fuse for the convertable top motors. See if something is binding against the convertible machine motors or mechanisms or the material itself. Pull it up ...

where the oxygen sensors located? there is one located before the catalytic converter and one after the catalytic converter on the exhaust Oxygen sensors are generally located in the exhaust system. ...

i have a 2004 mitsubishi eclipse with the cat converter bad how long can i run with it with a bad converter will it ruin my engine anytime that part is too expensive $1000. what can i do The Catalytic

Code p431 and p421 P421=Warm up catalyst system efficiency below threshold, bank 1 P431=Warm up catalyst system efficiency below threshold, bank 2 Sounds like you may have clogged or damaged catalyst ...

how to drain oil fron tranmission and tork converter To drain the Transmission Fluid from your Transaxle, you need to loosen the bolts around the Pan. As for taking the fluid out of the Torque ...

New torque converter. Looking to buy a 1997 eclipse gst. The owner says the trans is slipping and that a mechanic says it needs a new torque converter. Its fwd Will the trans come out from bottom of ...

I seem to have a lot of noise like wind in my 2012 triton mn.Any ideas noise not there all the time if it gets louder the harder you go then check for a faulty cat converter blocking the exhaust ...

loss of power after 4000 rpm in all gears, it makes a whistling or hissing noise, full power up to 4000rpm, engine code was for catilac converter which i replaced but still have the same power loss ...

My son has a 2002 GS, and from time to time the check engine light comes on and the last time they fixed one of the catalytic converter sensors and all was well. Tonight the engine starting bumping ...