2008 Dodge Charger "ignition switch" Questions

...Your Immobilizer is broken. The Immobilizer or SECURITY RING in the Ignition is broken, you need to replace the Ignition switch in your car. Be grateful you do not own a Volvo. $1,780

...the car off, and the key won't go into the lock position. Any ideas? it sounds like your ignition switch's mechanism has gone bad. Replace the ignition switch and that should solve your

...ignition switch and it being a sunday night i converted the whole ignition system to toggle swiches just so i could get to work the next day. ofcourse i never changed it back and my truck was

ignition switch (eletronic) This has been an issue with the chargers for a while. The starter relays under the hood panel. Usually start to go and takes 2-10 seconds for the starter to kick in.you can

...ignition switch. The pink with dark green wire should have power with the key in the crank position. That power goes to fuse #10 in the TIPM. it then goes to the starter relay. the starter relay is ...

NOTE **** the TIPM (Totally Integrated Power Module) is located in the Engine compartment, on the Passenger side Fender. NOTE ***** THE WIRELESS IGNITION NODE IS PART OF THE IGNITION SWITCH Hope helps

ignition switch What about it ...ask the question we all on this site love solving problems

Dodge charger won't crank or do anything when key is in. the ignition switch need to change and re programe sys

...ignition switch module, we started having problems with heat only coming from half of the dash/floor outlets. Then it quit heatin My personal belief is that the problem is related to the ignition ...

ignition switch lock cylinder mechanical key codes. Insert one of the two valid Sentry Keys into the ignition switch and turn the ignition switch to the On position. After the ignition switch has been