2008 Ford F-350 "rear brake parts 2004" Questions

rear parking brake assembly. Think the whole parking brake assembly needs replacing (noticed metal bent at edges), it might also be ruined. Where do I find such a thing? This is the assembly where the

...rear. One end connected to a "T" with the brake lines coming out of each end. Can't tell where the other end goes. Seems like a sort of vaccum hose. The TEE is also a vent line for the rear ...

...rear brake caliper sliders are part siezed or the pads siezed in the caliper frame 2 the wiring to the park brake motor open circuit or rubbed through on the rear subframe.3 the park brake motor has ...

rear wheels.2. Remove brake drum (parking brake must be off).3. Remove and clean ABS Sensor (Torx E8) with a spritzled rag.4. Remove grease cap from hub.5. Remove and discard hub retaining nut (36 mm)

rear brake calipers on 2004 freestar compess rear calipers many fords have "spin in" caliper pistons. Your local auto parts store sells the tools you need. (Multi sided for different sizes) You insert

...rear brake light problem. The rear center brake light works. The rear left and right brake lights do not. Fuses are fine. Checked bulbs and they look fine and have continuity. If not the fuse or bulb ...

rear brake caliper piston on an 2004 Audi A4 Caliper is loose. Can't depress the piston. It must be turned clockwise while being pushed in. The local parts store will have a tool just for this purpose

...can be cheaper. All 3 brake lights are NOT workingt! Replaced fuses and both rear light bulbs (both blubs were burnt out...hmmm) and still no brake lights. What else can I do??? 2004 Tahoe

...rear brake system replaced because of it which in turns becomes very expensive. this has happened 6 times already and there are no recalls on this part, none that i can find anyway. so what can i do? ...