2007 Ford Ranger FX4 Off-Road "motor shakes ran oil" Questions

...ran ok for a few days. only city driving. now getting real noisy and shaking. as much as i hate to say this, you probably have a rod knock and it is time to replace that motor. if a repair facility ...

...motor ran rough and now it starts to shake when i reach about 65 mph. what is my problem usually a rough running engine has nothing to do with an oil change you way have an oil leak onto the spark ...

...ran ok but idled a little rough. It got hard to start, and had oil in the throttle body. Now it cranks, but will not start, suspect broken timing belt by starting sounds. (100,000mi on car) If its a ...

...it again but keep the foot to the gas and it ran horribly. Constant knocking and shaking of the motor. This was my daily driver and now im at a lost. Please, help. Sounds like a timing belt ...

...shakes, it is normally either a bad motor mount (if the car runs fine) or your car is "missing" on one or more cylinders (misfire). The belt will squeal because they stretch with use. That can be ...

...SHAKES ARE HAPPENING ONLY WHEN THE CAR IS AT COLD START THEN U MIGHT HAVE A MINOR VALVE PROBLEM.THE VALVE HEADS DUE TO NO LUBRICATION FROM THE FUEL THEY TEND TO GET DIRTY AND NOT SIT AT THE CYLINDER ...

...shakes bad...won't get speed over 40. Engine bogs like it is flooded. Checked for vacuum leaks. Also oil in intake manifold ports cylinders 1,3,5, which is the back half of the motor you got oil ...

...motor is just runs rough shakes going down the steet. if you step on it it ahs plenty of power no smoke. Parked and ideling it seem to be doing the same thing rough. I have put fuel injecter cleaner ...

Motor died on interstate. Tried to restart but engine shakes and knocks. Had proper oil level and no fluids leaked. All lights on dash came on. Ran codes and p0011 and p0303 came up. Would sensor ...

...shakes bad...won't get speed over 40. Engine bogs like it is flooded. Checked for vacuum leaks. Also oil in intake manifold ports cylinders 1,3,5, which is the back half of the motor Scan for ...