2007 Lexus LX 470 "changing department keys" Questions

...keys and alarm system as per manual instructions and they seem to be working ok. The beep sound is similar to the beep made while using the right/left indicators except that this is continious. This ...

How do I reset the ("change oil soon) malibu 2008 There should be a reset under the glove department side. Usually, a small screw driver can be used to push in while the key is in run position, not ...

I would like to reset the oil change warning for a 2007 infinity g35 do a google search for oil change light reset on 2007 infinity G35,or look in owners manual. i believe you just turn the key on but

Thermometer guage and clock The thermometer will not read Farenheit, and the clock is in army time. How do I change these? to set the temp you have to have the key in the on position and hold the left

change oil message still on after oil changed. What triggers this message to turn off? A pcm sensor reads millage that triggers light. Try turn key on and off twice then with key in on position eng ...

changed oil in a non dealer shop 2007 ram 3500 6.7l diesel,cannot figure out how to reset the message center console warning message"oil change required" was told to turn on and off key rapidly 3 ...

...changing the barrel to have a new key wont help and ill tell you why. Inside the original key is a transponder chip that is programmed to the cars immobiliser unit. Attached to the ignition barrel is ...

Remote on '99 Jeep Cherokee not working... Remote on "99 Jeep Cherokee not working. Alarm sounds when opening the door with key. Changed batteries on remote but no luck. Back up remote does not work ...

keys do not have chip and car won"t start what can i do p.s lost old ignition hello! replacement lock cyldiners come with a blank key for reference only. you need to have your old key read by a dealer

department and they will cut you one for about 20 bucks by the vin # as long as no one has changed the lock cylinder from factory.for dealer to do this your name on tiltle or reg must match a photo id