2007 Jeep Liberty Sport "window wiper arm moving" Questions

window wiper arm moves away from window, leaving it unable to wipe? its possible the nut that tightens the wiper arm has come loose. just center the wiper arm in proper position and try to tighten the

wiper away from window and pry tab over when tab moves ,let the wiper back to the window,and notice wiper will not return all the way. that means you have released wiper arm and it will wiggle off. to

Wiper arm doesn't move The wiper arm for passenger side front window wiper doesn't move when on Check the arm nut, probably is loose, if not check the arm mechanism

...window wiper problem when the backwiper is on the wiper blade is maybe 1 inch away from the glass. it is wiping the air not the window. how can you adjust the blade so it trouches the window? this is ...

...window wiper on passanger side will not move, but driver side is fine. At one point it did move 2-3 inches but now it just says down. What could be the problem? have you tried the nut underneath the ...

...window. When the wiper is raised off the window, it moves as if it is not attached. Is this a loose lock nut? remove the plastic cover at the base of the wiper and tighten the nut but first make sure ...

...window the wiper skips parts of the window the wiper arm has a spring pulling in tight towards window the arm has a pin at one end where spring connects to the pin acts as a hinge it must be seized ...

wiper over extends and stops back in the middle of the window. i can move it with my hand when its off the teeth on the shaft aren't engaging the wiper arm-the arm strips out -you need a new wiper arm

...wiper to lift up off the window and the window can't get cleared off. How do I adjust the driver's side wiper arm? Someone at the parts store said something about adjusting something under the hood. ...

...wiper arms off the window to reduce friction and operate the wipers, do they both move? If the shaft and wiper arm doesn't move on the bad wiper, take it to a garage as it is a big job to replace the ...