2007 Hyundai Veracruz SE "key reset limp home mode" Questions

limp home mode. Based on my experiences, when in limp home mode, the transmission is forced to stay in 3rd gear, the engine will not exceed 2000RPM, the accelerator is not responsive past 2000RPM, and

...reset for the right key to 'cure the problem'? I've had it towed to my home. Thanks for any help! Sometimes valet keys will make the vehicle run in limp mode so no joy riding ...

reset. It. Make sure battery is charged .Turn key on wait about 10 seconds. Turn it off. Wait 5 sec. Turn key on. Wait 10 sec. Turn key off. Wait 5 secs. Then start it up. It should be fine after that

...key FOB and it worked. My car starts and can stay on at 1000-1250 rpm however, nothing is happening when I push the gas paddle. I went even on drive and it just drives at 15 miles speed and at the ...

...LImp mode? Seems that after testing and resetting codes, we turn the key, it starts as normal for about 3 seconds, then dies. Trying to start it again results in no real "ignition" allowed. Seems ...

...limp home mode but again resets on key off. no other warning lights drives nice when behaving. Already checked fuel, used cleaner, changed filters etc. Any known gremlins to look at? with diesels ...

key to the on position i could hear the fuel pump engage so i dont think it is that. when i disconected the battery for a few minutes and reconected it it started up and got me home. any ideas on what

...reset mine 1. Turn key over til dash lights are on. Do not start. 2. Wait for all lights to disappear. 3. Depress gas pedal slowly counting to 20 all the way to the floor and hold it there 4.keep gas ...

key in the off position. this problem started with the trans in limp mode and when the ads relay is removed the Eatx relay begins to click as well. Van will no longer turn over or start. and dash goes

...key light flashes for 5 seconds, the car is in limp home mode. How do I clear this limp mode? you cannot unless you fix the reason for the limp mode you can reset the ECM using a scan tool but if you ...