2007 Kia Amanti Sedan "fuse mirror" Questions

...fuse for the 4th time. 2005 kia amanti Hi, If the power seat keeps burning out fuses, then the motor in it is drawing too much amperage. There can be something caught in the tracks to the system that ...

fuse disables keyless entry, Driver seat/mirror memory any instrument panel related devices radio, temp trip etc. and Instrument Panel displays. Draw on battery goes to 0.000 Amps. Have not determined

...mirror fuse keeps blowing Driver's mirror broke off by person (not car)who ran into car. Replaced at home with mirror 62740G off Amazon. Now the mirror fuse keeps blowing (even after new fuse) when ...

mirror has worn out, and will need to be replaced. If it is both mirrors though, it could possibly just be a shorted fuse. The fuse for the mirrors should be located on the interior fuse box, and will

mirror "fuse"; https://www.audiworld.com/forums/q7-discussion-112/q7-driver-side-mirror-fuse-2891055/ * Forum also suggests there is no fuse or to check fuse panel; https://www.audiworld.com/forums/s4

...mirror.  If one side works and the fuse blows when trying to operate the other side, then you at least know which mirror circuit is shorted and you can diagnose accordingly.  If the fuse ...

are fine..but still no fire to the mirror switch...Help... but still no fire to the mirror switch ????? B+ voltage ! CTSY fuse # 3 - 20 amp , location insturment panel fuse block . You check this one

fuse mirror Is there ONE fuse i can remove so that the motor to automatically fold in the mirrors will stop running, It runs continuously but the mirror does not fold in. There isn't any single fuse ...

...fuse, try the right mirror, OK then try the left mirror, OK. Try it a few more times, OK. Trucks running or not, same results. Start the tuck up later to go somewhere and the mirrors don't work and ...

...if fuse is good, check for 12v at the mirror, if no voltage check for 12v going to the power mirror switch. If no voltage check for 12v at the ignition circuit that feeds 12v to the power