2007 Kia Optima "remove alternator focus 1" Questions

...you change an alternator on a ford focus 1.4 2007 series 1) Remove serpentine drive belt. 2) Disconnect electrical from alternator. 3) Remove mounting bolts. 4) Remove alternator. Reverse to

alternator, and need to get instructions. 1. Disconnect the battery first. 2. Remove all the connectors on the back of the altenator. 3. Remove the screws holding the wires to the altenator. 4. remove

...remove alternator and belt on a ford focus x reg Just took one out last night. It also was stuck. Had to use small pry bar to get off the front mount. Sprayed the mount with PB blast to help. You do ...

alternator (back right of the engine compartment) 4) The scary part - remove the 3 engine mount bolts on that sode of the car 5) from the transmission jack up the engine just enough to tilt it forward

...remove the alternator from the enging while the engine is still in the vehicle. It is a 2003 ford focus, with the zetec engine. Thanks Mike Yes it is possible but it requires removing and moving the ...

Focus to enable me to use an alternative stereo without butchering the wiring please? Most stores that sell and install radios etc will have adapter harnesses and also face plates to make your install

alternator has nothing to do with the start and run function if the battery is charged up and in good condition ,sounds like the main battery cables have a bad contact/connection or battery is shot<

...focus from an auction and my problem is that i cant get the alloy wheel off becauce one of the nuts is a locking nut. i dont have a key to take the bolt off fair--ti can be pretty complicated ...

...alternator on a 2001 ford focus and need to know what size wrench is needed to loosen the timing belt tensioner enough to remove the timing belt. Please help I don`t know the size,but it will be ...

alternator. #2 When "jumping": was it Post to Post or Negative to Engine Block and Positive to Post? If so then check your Ground wire going to the Engine Block. Remove and using a metal brush - clean