Norelco Arcitec Electric Shaver - Gray/Black "charging circuit" Questions

...charging circuit in the razor. I pushed the on-off button while the razor was charging in its charger. The razor is now dead and will not charge. The charger shows an AC output of +/- 10 VAC under no ...

...charging it and charge light at the 20% mark is red. Will not take a charge or turn on when plugged in. Has not been wet or dropped. Any ideas? With these symptoms, it is most likely a bad connection ...

charging circuit is working , if not he alternator must be checked or the charging circuit must be checked. If the battery does not charge up then it must be replaced. Secondly we come to the fault of

When fully charged the red light comes on immediately and the shaver does not start. When fully charged I switch on, the red light comes on immediately and the shaver does not start - this shaver is ...

...charging lights do not come on. Any ideas on what may be wrong? If the old batteries were corroded, that may have damaged the circuit board. If the batteries were getting hot before the shaver died, ...

...circuit board. These sometimes break. Here's a reply for the 4601X shaver if LED indicator fails to work after battery replacement: one solution, the voltage regulator part in back of the razor fell ...

like a short circuit in the charging side Please advise repair shop in the 19087 area or Philadelphia, PA area as my Remington 9500 still does not work after it had been cleaned and charged. Thank you

my 7680 clean and charge unit does not work If it simply does not work at all, the circuit board is probably damaged. This is not repairable and you will need to buy a replacement. You will find a new

charging light no longer illuminates when you plug it in, you will need to change the whole circuit board. You will find the batteries and the circuit board with batteries at shaveroutlet.com. You can

charging, so I went ahead and bought the battery circuit board for $39.95 and had it changed by a Braun technician. He plugged it in for about 20 minutes in order to test it; the green light turned on